Which PCB terminal-block fields must match before you compare offers?
Match the terminal block to the board interface before comparing offers. Record pitch, position count, pin layout, mounting process and connection direction, then retain electrical ratings with their stated conditions. A familiar housing or a nearby pitch is not evidence of a drop-in replacement. Use the maker drawing for the named reference and obtain engineering confirmation for any substitute; sourcing evidence alone cannot approve an electrical design.
Materially updated . Editorial checklist; no live supplier offer is asserted.
Read or save the Markdown worksheetWhen this route fits
Use this when a PCB terminal block must fit a specific board interface. Compare its drawing, pitch, pin layout, wire entry, mounting process and condition-scoped ratings before an engineer considers a substitute.
Use this to prepare requirements and evidence questions. It does not contact suppliers, obtain a formal quotation, certify a factory or approve a substitute.
Minimum buyer brief
Required reference and drawing; board interface; poles/rows; mounting; rating conditions; quantity unit.
| Field | Buyer input | Evidence check | Reject or unknown |
|---|---|---|---|
| pitch | Record the exact required spacing and drawing reference. | Compare the maker drawing with the board interface. | Nearby5.0/5.08mm labels do not prove interchangeability. |
| positions and rows | Specify number of positions, rows and connections. | Do not count a product photo as a particular configured variant. | Wrong pole count is a hard mismatch. |
| pin layout and dimensions | Record pin arrangement, pin dimensions and required board geometry. | Use the dimensional drawing for the exact part. | Same external housing does not establish same pinning. |
| mounting process | State the buyer-required mounting/solder process. | Retain the product-specific process description. | Do not assume all terminal blocks support the same process. |
| connection direction | State wire entry orientation and mechanical constraints. | Check the reference-specific geometry. | An obstructed or reversed interface is not a permitted substitute. |
| condition-scoped ratings | Record rating plus the conditions and documentation named by the maker. | Preserve different condition-scoped values without choosing the largest. | Do not detach a voltage/current value from its conditions. |
Exclude or resolve
Reject near-pitch or different pinning as drop-in; do not detach voltage from its stated conditions or infer approval from a housing badge.
Questions to copy into a supplier enquiry
Does the drawing match the exact footprint? Is the mounting process supported? Which rating conditions and model-scoped documents apply?
Keep quantity and price on the same basis
Keep currency, original unit, requested quantity, SKU, quantity tier and observation date together. A listing is dated commercial evidence; a supplier-confirmed quotation is a separate response for your order. Unknown pack conversion, MOQ waiver, inventory, freight or tax stays unknown.
Read evidence without upgrading it
BUYER_STATED is explicit buyer input. SOURCE_OBSERVED records a dated source; DERIVED labels an interpretation. OBSERVED does not mean SUPPLIER_CONFIRMED. Missing facts stay UNKNOWN; TO_CONFIRM names the next question.
References and their limits
The table is an editorial decision aid. These references support only their stated scope; they do not verify a supplier or a current offer.
- Phoenix Contact PCB terminal manufacturer data: Drawing, pitch, pin layout, mounting and condition-scoped electrical fields for the named reference only; no interchangeable China substitute.
- Current free discovery and v4 public resource: Runtime mode admission and same public sample only; no new purchase or supplier facts.
Review a brief before any purchase
Free preparation does not purchase a check or contact suppliers. Image Stripe USD 2.99 and text/model x402 2.99 USDC are separate paid routes. Image x402 and text/model Stripe are OFF in the dated observation; live admission is authoritative. The proposed $19.90 RFQ service is not open for purchase.